 |
Hydraulic hand Jack, Working load 12 tons. Operated by air pressure
or lever. Tool me a while to find this one since it was also air
powered, sure beat doing it my hand if you have the air.
Is was from Northern Tools, cost about $130. |
 |
You can not work without a Jack Stand, 6 ton rating. |
 |
Here is a nice little wrench / ratchet that can help break loose that
top bolt of the brake caliper. Click here
for more.
After you have been using this, you are going to be using your socket
set as much.
|
 |
This here is a great tool for doing the rear brakes on the Hummer,
Real, it's almost a must have tool if you are going to do the rear calipers.
Click here for
more info ($380)
This tool can also be rented click here for more info |
 |
This here is a compression tool kit from Harbor Freight for about $39.
Click here more more info on brake caliper compression tools, Click on the picture for a larger picture of the kit. |
 |
This item here that looks like an Apollo space capsule is required
for the two piece Run Flats. It aids in tightening or clamping the run
flat to the rim. Without it you cannot get the run flats tight enough for
driving. Click here for basic instructions
on how the tool works
This tool can also be rented click here for more info |
 |
Brake Re-Surfacing Pads.
Click here or on picture for more info |
 |
Run Flat compression tool and safety strap. A must if you have one piece run flats. This one came from Gulf Coast Rovers here in Houston. |