Finally I move the Pre-luber down by the oil pan, seems to work a lot better and quieter.

It is now mounted next to the frame, just under the power steering gear box.  Photos are a little dark, but every thing under there is black, so it makes it a little hard to photograph.
 
 

	Here is shot of the Pre-luber mounted to the plate that Stinger Accessories sent to me, and it's mounted the frame for the engine mount. You can also just see the handle of the 3 way valve that is mounted to the pump that is used for dumping the oil.  Click on the photo for a larger photo.
	Different angle, better shop of the 3 way/dump valve we installed.  For safety, there is a plug in the valve to prevent un-wanted dumping of the oil, and to help keep the dirt out.  Click on the photo for a larger photo.
	Here you can see the long bolt used to mount the pump mounting plate to the frame of the Hummer. The bolt has a nut welded to one end, that end is just under the pump, and goes through a hold in the frame and bolts down into place as you can see here in the photo.
	Another shot. Here I think you can see the mounting plate a little better.
	Bottoms-up view of the pump.

Click on any photo for a larger image.

 

Monday November 04, 2002